Upon Installation Wizard's start up, a searching box will pop up. This program searches for
product on the same LAN:
For the MAC number in the "MAC" field, please check the label on the bottom of the camera.
The IP addresses shown in the "Current IP Address" field reflect those on the local network.
They may be from the DHCP server. If there is no DHCP server, the camera will try to find a free
IP address (this takes from 15 second to 3 minutes, depending on the LAN status). The method
After searching, Network Cameras will be
located by the Installation Wizard. There may
be several entries shown in the window. The
Administrator may differentiate the Network
Cameras with the MAC address.