LevelOne FCS-1070 User Manual page 35

"Enable UPnP" This turns on or off the UPnP function. When UPnP is turned off, the camera
cannot be found through network neighbors in MS Windows XP. If the UPnP network
component is installed in Windows XP, the hostname of the Network Camera will be shown with
bracketed IP address in the Network neighbors. Ex: Network Camera with Pan/Tilt
(xxx.xxx.xxx.96). That is: The hostname of the Network Camera is "Network Camera with
Pan/Tilt", and the IP address of the Network Camera is xxx.xxx.xxx.96, depends on the last
value of the IP address assigned to the Network Camera.
"Enable UPnP Port Forwarding" This turns on or off the UPnP port forwarding function. If your
camera is behind an NAT router and your router supports UPnP port forwarding, turn on this
option will help you to access your camera.
"Save" Click on this button to save current settings for the DDNS service and UPnP function.
<url> http://<Network Camera>/setup/ddnsupnp.vspx
<Network Camera> is the domain name or original IP address of the Network Camera.