Cisco AP-702W Deployment Manual page 2

Introduction
Introduction
This document covers the Cisco 702W Series Access Points theory of operation and installation as part
of a Cisco Wireless LAN (WLAN) solution. Subjects related include:
•
•
•
This document is intended for trained and experienced technical personnel familiar with the existing
Cisco Wireless Networking Group (WNG) product line and features.
AP-702W
Overview
The Cisco AP-702W Series Access Point targets Multi-Dwelling-Unit (MDU) deployments, such as
customers requiring support for Higher Education, Hospitality, college dorm-rooms, K-12 classrooms,
and healthcare, seeking a high-performance in-room Wireless + Wired Access Device.
The AP-702W is a wall plate Access Point (AP) designed to combine the features of an AP and a four
port switch into a single unit with a small footprint targeting education and hospitality markets.
Do not confuse AP-702W with AP-702i, which is a conventional AP designed for ceiling mounting and
Note
does not have additional Ethernet ports for device connectivity.
AP-702W Features Include
•
•
•
•
•
•
•
•
The AP-702W, while similar to the Cisco AP-700 series with regards to performance, is different and
embodies a wall mount design and should not be ceiling mounted.
Cisco Aironet Series 702W Access Point Deployment Guide
2
Overview of the AP-702W.
Physicals / Hardware details, mounting options, bracket choices, and installation considerations.
Powering options, antenna patterns, switched ports, AP placement, and so on.
Combined hardware switch and wireless AP.
4 x 10/100/1000BASE-T local Ethernet ports for wired device connectivity.
1 local Ethernet port includes Power-Over-Ethernet (PoE) out.
1 x 10/100/1000BASE-T Power-Over-Ethernet (PoE) uplink port.
802.11n 2x2:2 simultaneous dual band 2.4 GHz and 5 GHz support.
Compact form factor designed for in-room installations.
Integrated 2.4 GHz 2 dBi and 5 GHz 4 dBi antennas.
Small footprint 6 x 4 x 1.6 inches.