Cisco AP-702W Deployment Manual page 15

AP-702W
Figure 16 Verifying FULL Power on the Controller
The PoE needs to be at full power. You can use PoE+, 802.3at, local power supply, or Cisco Power
Injector 4 Cisco part number AIR-PWR-INJ4 which provides higher PoE power. The AP-702W will not
be able to provide PoE out if a 15.4 W injector, such as the AIR-PWR-INJ5 or 802.3af power, is used.
For more on PoE, see Table 1.
Cisco Aironet Series 702W Access Point Deployment Guide
15