Table of Contents
Advertisement
AP-702W
Figure 11
As mentioned, the AP-702W is designed for wall mounting and so it may have a slightly smaller cell
coverage area than a conventional AP that is typically mounted physically higher on a ceiling. This is
fine, because Cisco Radio Resource Management (RRM) will learn and properly balance out the channel
assignments, and clients will roam smoothly when there is a mixture of ceiling and wall mounted APs.
Figure 12
Cisco Aironet Series 702W Access Point Deployment Guide
12
AP-702W - Antenna Radiation Patterns for 5 GHz
Heat Map - AP-702W and AP-3700
Advertisement
Table of Contents
