Configuring A Bgp Peer Group - HP VSR1000 Configuration Manual

Step
2. Enter BGP view.
3. Create an IPv4 BGP peer
and specify its AS number.
4. (Optional.) Configure a
description for the peer.
5. Create the BGP IPv4
multicast address family
and enter its view.
6. Enable the router to
exchange IPv4 unicast
routing information used
for RPF check with the
specified peer.
Configuring a BGP peer (IPv6 multicast address family)
Step
1. Enter system view.
2. Enter BGP view.
3. Create an IPv6 BGP
peer and specify its AS
number.
4. (Optional.) Configure
a description for the
peer.
5. Create the BGP IPv6
multicast address
family and enter its
view.
6. Enable the router to
exchange IPv6 unicast
routing information
used for RPF check
with the specified
peer.

Configuring a BGP peer group

The peers in a peer group use the same route selection policy.
In a large-scale network, many peers can use the same route selection policy. You can configure a peer
group and add these peers into this group. When you change the policy for the group, the modification
also applies to the peers in the group.
A peer group is an IBGP peer group if peers in it belong to the local AS, and is an EBGP peer group if
peers in it belong to different ASs.
Command
bgp as-number
peer ip-address as-number as-number
peer ip-address description
description-text
address-family ipv4 multicast
peer ip-address enable
Command
system-view
bgp as-number
peer ipv6-address as-number
as-number
peer ipv6-address description
description-text
address-family ipv6 multicast
peer ipv6-address enable
197
Remarks
N/A
By default, no IPv4 BGP peer is
created.
By default, no description is
configured for a peer.
By default, the BGP IPv4
multicast address family is not
created.
By default, the router cannot
exchange IPv4 unicast routing
information used for RPF check
with the peer.
Remarks
N/A
N/A
By default, no IPv6 BGP peer is
created.
By default, no description is
configured for a peer.
By default, the BGP IPv6 multicast
address family is not created.
By default, the router cannot
exchange IPv6 unicast routing
information used for RPF check with
the peer.