Lexmark Optra SC 1275 Service Manual page 42

Status Message
Not Ready
Press Go
Resetting the Printer
Formatting Flash
DO NOT POWER OFF
Programming Flash
DO NOT POWER OFF
Formatting Disk
Action
The printer is in the Not Ready state,
which means it is not ready to
receive or process data.
This message displays when Stop is
pressed during a print job. Press Go
to take the printer out of the not
ready state.
Or, to reset the printer:
• Press <Menu>to access the Busy
menu.
• Select Reset Printer.
The printer is deleting any print jobs
in process and restoring all settings
to user defaults.
No button actions are possible while
this message is displayed.
The flash memory is being format-
ted.
No button actions are possible while
this message is displayed.
The flash memory is being pro-
grammed. Fonts or macros are
being written to flash memory.
No button actions are possible while
this message is displayed.
The disk is being formatted.
No button actions are possible while
this message is displayed.
Diagnostic Information 2-7