Lexmark Optra SC 1275 Service Manual page 71

Jam 200
The jam occurred at the paper pickup source before it reached the
timing/synchronizing roller.
FRU
1 • Actuator
• Synchroniz-
ing Paper
Sensor
(PC1)
2 • Paper Take-
up Solenoid
(SL3)
• Paper Take-
up Solenoid
(SL7,SL8)
• Transport
Solenoid
(SL4)
3 • Take-up
Roller
• Transport
Roller
• Paper Take-
up Clutch
• Transport
Take-up
Clutch
• Depressing
Cam
• Separating
Pad
2-36
Action
Go to the "Sensor Service Check" on page 2-47
and check the synchronizing/timing roll paper sen-
sor. If it is good, return to this check and continue.
Check the paper takeup solenoid and the transport
solenoid for correct operation. Replace as neces-
sary.
Check these parts for dirt or wear. Clean or change
as necessary.