Section 2-Front Hangers; Adjusting Footrest Height - Invacare Action NG range Maintenance And Adjustment

S E C T I O N 2 — F R O N T H A N G E R S
After ANY adjustments, repair or service and before use, make sure all
attaching hardware is tightened securely - otherwise injury or damage
may occur.
A 5 cm clearance between the bottom of the footplate and the ground/floor MUST
be maintained at all times.

Adjusting Footrest Height

NOTE: For this procedure, refer to FIGURE 2.1.
1. Remove calf strap, if so equipped.
2. Unscrew locking bolt (5 mm Allen key & 10 mm spanner)
3. Position the footrest assembly to the desired height.
NOTE: A 5 cm clearance between the bottom of the footplate and the ground/floor MUST
be maintained at all times.
4. If the distance between the bottom of footplate and the ground/floor is not 5 cm
minimum, adjust footrest tube accordingly.
5. Using the locking bolt, secure the footrest tube to the footrest support. Securely
tighten.
6. If necessary, repeat STEPS 2
7. Reinstall the calf strap, if so equipped.
Locking bolt
5 cm mini
W A R N I N G
5 to adjust remaining footrest.
-
FIGURE 2.1 Adjusting Footrest Height
SECTION 2—FRONT HANGERS
9 Ac t i o n 1 N G R a n g e