Installing/Removing The Back Brace - Invacare Action NG range Maintenance And Adjustment

SECTION 4—SEAT/BACK

Installing/Removing the Back Brace

W A R N I N G
If a back brace is already installed, you don't have to re-install the back
cane inserts.
After ANY adjustments, repair or service and before use, make sure all
attaching hardware is tightened securely - otherwise injury or damage
may occur.
NOTE: For this procedure, refer to FIGURE 4.6.
NOTE: To remove the back brace, reverse this procedure.
1. Remove the end caps from the back canes.
2. Remove the handles from the back canes.
3. Install the inserts into the back canes.
4. Secure the inserts with mounting screws.
5. Install the handles on the back canes.
6. Align the back brace ends with the handles of the back canes.
7. Secure the back brace to the back canes with the mounting bolts.
Back brace
FIGURE 4.6 Installing/Removing the Back Brace
1 7 Ac t i o n 1 N G R a n g e