Main Screen Of Srx Controller; Projector List - Sony SRX-T615 Operating Instructions Manual

[PC Port Setting]: Allows you to change the port
number.
c [Help] menu
Includes the following commands.
[Version]: Displays version information for SRX
Controller.
d Projector list
Displays a list of information on projectors that are
connected to the same network (subnet). A projector
that can be connected via either IPv4 or IPv6 will be
listed twice as separate projectors.
When you double-click a projector in the list,
connection to the projector is established and the main
screen of SRX Controller appears.
[Alert]: Not supported.

Main Screen of SRX Controller

a [File] menu
Includes the following commands.
[Save Log]: Used for maintenance.
For details, contact your dealer or your local
Sony representative.
[Quit]: Quits SRX Controller.
6
Parts Identification
[Model Name]: Displays the projector's model name.
[Serial No.]: Displays the projector's serial number.
[Type]: Displays the protocol type (IPv6/IPv4) that
[IP Adress]: Displays the projector's IP address.
[Connection]: Indicates the network connection
[Power]: Indicates the power status of the projector.
[Region]: Displays the region in which the projector
[Location]: Displays the location in which the
[Name]: Displays the projector's name (only if this
[SCREEN CONTROL] block
b [Password] menu
Includes the following commands.
[Reset]: Allows you to reset the password required
can be used for connection.
status.
"Connectable" will appear for projectors that can
be selected from SRX Controller.
is installed (only if this information is registered).
projector is installed (only if this information is
registered).
information is registered).
for authentication when displaying the
[SERVICE] and [SETTING] tabs.
This menu only appears when a user with
administrator privileges has started SRX
Controller.