Toshiba GN-1041 Operator's Manual page 42

1. Setting Up Wireless Network
5.
Selecting no security mode
You can also set no security for wireless access.
NOTE: If you do not set no security, anyone how knows the SSID can connect to the wireless
network. Therefore, it is recommended to set the security if it is possible.
1.
2.
42
Press the [YES] button to shut down the equipment.
• The wireless settings apply after restarting the equipment.
Press the [NONE] button and press the [NEXT] button.
• The TRANSMIT POWER and RATE SETTING screen is displayed.
Select the transmit power and press the [NEXT] button.
• Select the low transmit power if you want to limit the area that the wireless
communication is enabled. If you do not have to limit the area, select
[100%].
GN-1041 Operator's Manual — Setting up the Ad Hoc Mode