Storm Control Configuration - Planet MGSW-28240F User Manual

24-port 100/1000base-x sfp with 4-port 10g sfp+ managed metro ethernet switch

Hide thumbs Also See for MGSW-28240F:

Table of Contents

User's Manual of MGSW-28240F

4.9.13 Storm Control Configuration

Storm control for the switch is configured on this page.

There is a unicast storm rate control, multicast storm rate control, and a broadcast storm rate control. These only affect flooded

frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.

The configuration indicates the permitted packet rate for unicast, multicast or broadcast traffic across the switch. The Storm

Control Configuration screen in

Figure 4-9-16

Figure 4-9-16: Storm Control Configuration Page Screenshot