94
R E P A I R S
1
3. Use a screwdriver to release 4 latches.
4. Open closing handle.
5. Lift and remove cover (1).
Assembly checkpoints
1
10
•
Check if damper (10) for closing handle is installed on cover (1).
•
For correct layout of the wires to the coffee button prints, see "Replacing electronic
control board with button prints" on page 95.
•
Assemble left side panel (3) first.
•
Insert right side panel (4) into hinges at the top of the left side panel. Then fold down
right side panel and click latches.
•
Check that all latches are engaged.
Citiz service manual
3
4