Table of Contents
Advertisement
After this repair step
the core unit can be
pulled out of the plat-
form slightly (with still con-
nected hoses and wires).
Now the covers of the core
unit can be removed.
The hoses can
remain on the water
tank connector.
Use a pair of flat pliers
to pull off insulating
sleeve with recepta-
cle.
56
R E P A I R S
•
Loosen 4 screws (41, oval shaped head) at the bottom side of platform.
For complete removal of the core unit proceed as follows:
•
Remove water tank connector (53) from platform (see page 51).
•
Disconnect adapter plug (15) of phase and neutral wires.
•
If present, disconnect ground wire (15, part of thermoblock assembly).
Citiz service manual
41
41
53
15
Advertisement
Table of Contents
