Table of Contents
Advertisement
11
End of seam section input during seam programming
.01.05
After the appropriate function has been called up, the menu for entering the functions and
values for the end of the seam section without condensed stitches appears.
● If necessary, switch off the condensed stitches function.
● Switch the pedal function for changing to the next seam section on or off.
● Switch the knee switch function for changing to the next seam section on or off.
● Enter or change (with the number keys or arrow keys) the number of stitches for the
seam section.
● Execute or do not execute the automatic sewing stop function at the end of the seam
section.
● Switch the "sewing foot raised" function on or off, see Chapter 10.01 Manual Sewing.
● Switch the "thread trimming" function on or off, see Chapter 10.01 Manual Sewing.
● Switch the "needle raised" function on or off, see Chapter 10.01 Manual Sewing.
● Conclude the input and change to programmed sewing.
It is not possible to set every combination of functions.
All the activated functions are shown as inverse symbols.
Input
11 - 8
Advertisement
Table of Contents
