Reset To Factory Default Mode Under Console Interface - Planet GSW-4804SF User Manual

3.3 Reset to Factory Default Mode under Console Interface

Once, lose or forget the current IP address or login username / password. Once the terminal has connected to the Switch,
power on the Switch, the terminal will display that is perform the loading GSW-4804SF program procedures. When the
" Waiting 2 seconds : Press <d> for default parameters" text appears, please press "d" from your keyboard then the Switch
will perform the reset device to factory default mode procedure and the screen appears in
This Console interface only provide reset system to factory default mode, for further switch
Notice:
management. Please access GSW-4804SF Web interface for further management.
Figure 3-1 Loading Default Parameters of GSW-4804SF
-18-
User's Manual of GSW-4804SF
Figure 3-1.