Table of Contents
Advertisement
Port Mode
Access
Always Untag
Trunk
Port VID (PVID)
Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for accommodating devices
that you want to participate in the VLAN but that don't support tagging. The Switch allows each port to set one PVID, the range
is 1~255, default PVID is 1. The PVID must be the same as the VLAN ID that the port was defined as belonging to in the VLAN
group, or the untagged traffic will be dropped.
1. Select 802.1Q VLAN in the VLAN Type field and click on the "Apply" button.
The main page then changes to the 802.1Q VLAN table which displays the VLAN configuration of each port.
VLAN Membership
Belongs to a single untagged VLAN
Allowed to belongs to multiple untagged
VLANs at the same time
Allowed to belongs to multiple Tagged
VLANs at the same time
Figure 4-50 802.1Q VLAN Type Web Screen
Figure 4-51 802.1Q VLAN Configuration Web Screen
Frame Leave
( Tag=PVID be removed)
(Tag=PVID be removed)
(Tag=PVID or Original VID be remained)
-61-
User's Manual of GSW-4804SF
Untagged
Untagged
Tagged
Advertisement
Table of Contents
