4.6.4 Turst Mode
This section provides Turst Mode Configuration and the screen in
object of the Switch.
Object
Trust Mode Setup
Choose Trust Mode
Apply button
Figure 4-72 Turst Mode Web Screen
Provide three various Trust Mode and the available options are
Layer 2 Trust Mode: When Layer 2 Trust mode is enabled, QoS base on packet header of
Layer 2 protocol, for example: IEEE 802.1p priority.
Layer 3 Trust Mode: When Layer 3 Trust mode is enabled, QoS base on packet header of
Layer 3 protocol, for example: DSCP of IP packet.
Both layers of turst to be enabled Concurrently: Both layers of trust to be enabled
concurrently, Layer 3 trust have precedence over Layer 2 trust.
Default is Layer 2 Trust Mode.
Press this button to take affect.
Table 4-29 Descriptions of the Turst Mode Web Screen Objects
appears.
Figure 4-72
Description
-76-
User's Manual of GSW-4804SF
describes the Turst Mode
Table 4-29