Daikin Super multi NX E Series Service Manual page 169

SiBE121135_A
Check Method 2
1. Press the 3 buttons ([TEMP]
2. Press the [TEMP]
3. Diagnose by the sound.
4. Press the [MODE] button.
Service Diagnosis
mode.
The left-side number blinks.
or
beeps or the long beep.
beep : The left-side number does not correspond with the error code.
two consecutive beeps : The left-side number corresponds with the error code but the
long beep : Both the left-side and right-side numbers correspond with the error code.
The numbers indicated when you hear the long beep are the error code.
Error codes and description
The right-side number blinks.
, [TEMP] , [MODE]) at the same time to enter the diagnosis
button and change the number until you hear the two consecutive
right-side number does not.
→
Refer to page 167.
Service Check Function
(R8381)
(R8382)
(R8383)
(R8384)
(R8385)
158