II. THE WEATHER STATION
The Weather Station can be mounted on the wall
with the use of a wall hanging screw (not
included).
A. WALL MOUNTING
1. Place a screw (not included) into an
2. Place the Weather Station onto the
TROUBLESHOOTING
Problem: No outdoor temperature is displayed.
Solution:
appropriate wall, leaving approximately
3/16 of an inch (5mm) extended from
the wall.
screw using the hanging hole on the
backside. Gently pull the Station down
to lock the screw into place.
1) Remove all batteries—wait 30
seconds—then reinsert into sensor first,
then into the station.
18