Table of Contents
Advertisement
desired location, and wait approximately 10
minutes before permanently mounting to ensure
that there is proper reception.
Temperature Station should display a temperature
in the OUTDOOR LCD within 3 minutes of
setting-up.
I.
THE REMOTE TEMPERATURE SENSOR
The Remote Temperature Sensor can be
mounted in two ways:
•
with the use of screws, or
•
using the adhesive tape.
A. MOUNTING WITH SCREWS
1. Remove the mounting bracket from the
2. Place the mounting bracket over the
3. Where marked, start the screw holes
Remote Temperature Sensor. The
bracket should snap off easily.
desired location. Through the three
screw holes of the bracket, mark the
mounting surface with a pencil.
16
The Weather
Advertisement
Table of Contents
