Table of Contents
Advertisement
Probability of Damaging Thunderstorms: Chance of Thunderstorms within 25 miles.
⋅
Probability of Tornado: Chance of Thunderstorms within 25 miles.
⋅
Sky Cover: Cloud cover percentage for the current hour.
⋅
Snow Accumulation: Expected accumulation of new snow in a 6 hour period
⋅
Wind Direction: Forecasted sustained wind direction for the indicated hour
⋅
Wind Speed: Forecasted sustained wind speed for the indicated hour.
⋅
Wind Gust: Maximum 3-second wind speed (in knots) forecast to occur within a
⋅
2-minute interval. Wind gust forecasts are valid at the top of the indicated hour.
HOW DO I CHANGE BATTERIES IN MY SENSORS WITHOUT LOSING DATA?
We designed this station for convenience, so that a simple change of batteries does not lose data or require you to
power down your station.
•
If you have a low battery icon on your station, you need to replace the batteries in the sensor or in the station
as indicated.
•
Simply install fresh
batteries
search for your sensors.
•
When changing the batteries in the station, continue using the power cord. After replacing the batteries, no
other action is needed. The batteries in the station only maintain time/date in the event of a power outage.
BAR CODE: WHAT ARE THE BARCODES AND ID NUMBERS
•
Did you know that your sensors will "lock" into your station?
•
This ensures that the sensor readings are from your sensor and not a neighbors'.
•
When you press and release your SENSOR button you will see your station ID, your
thermo-hygro sensor ID, and your wind speed sensor ID and your rain sensor ID.
•
The sensor ID on the station should match your first six numbers on the barcode of that sensor.
•
These sensors will remain locked in your station until you manually delete them.
•
The barcodes are also important identifiers for the La Crosse View™ app if you choose to connect.
In the rare event you need to replace your sensor, you will first need to delete the old sensor ID from your station.
1. Remove batteries from your old sensor.
2. Press and release the SENSOR button to view your sensor ID number.
3. While viewing your sensor ID, press the MINUS button for 5 seconds to delete your old sensor ID. Dashes will
show the ID number.
4. Your station will automatically begin searching for the new sensor.
5. Install batteries in your new sensor and allow up to three minutes for your new sensor
readings and ID to appear on your station.
TROUBLESHOOTING
into your sensor then hold the SENSOR button for 3 seconds and your station will
ON MY SENSORS AND ON MY STATION?
HOW DO I DELETE SENSOR ID NUMBERS?
12 |
P a g e
Advertisement
Table of Contents
