6 - 2
Symbol LS9203/LS9203i Product Reference Guide
Connecting an RS-232 Interface
This connection is made directly from the scanner to the host computer.
Power supply
RS-232 Direct Connection
Figure 6-1
Connect the RS-232 interface cable to the rear of the scanner, as described in
1.
page
1-3.
Connect the other end of the interface cable to the serial port on the host.
2.
Connect the power supply.
3.
Scan appropriate bar codes in this chapter to match the host settings.
4.
Serial Port Connector to Host
Power supply cable
Interface cable
Interface cable
Installing the Interface Cable on