Introduction; Chapter 6: Rs-232 Interface Introduction; Connecting An Rs-232 Interface - Symbol LS1203 Product Reference Manual

Chapter 6
Chapter 6
Chapter 6
RS-232 Interface

Introduction

This chapter describes how to set up the scanner with an RS-232 host. The RS-232 interface is used to connect
the scanner to point-of-sale devices, host computers, or other devices with an available RS-232 port (e.g., com
port).
If the host is not listed in
parameters to match the host.
The scanner uses TTL RS-232 signal levels, which interface with most system architectures.
NOTE
For system architectures requiring RS-232C signal levels, Symbol offers different cables providing
TTL-to-RS-232C conversion. Contact the
Throughout the programming bar code menus, default values are indicated with asterisks

Connecting an RS-232 Interface

This connection is made directly from the scanner to the host computer.
Table 6-2, refer to the documentation for the host device to set communication
*
*Baud Rate 57,600
Indicates Default
"Symbol Support Center"
Feature/Option
RS-232 Interface
for more information.
*
( ).