Upc/Ean Supplemental Redundancy - Symbol LS9203 Product Reference Manual

9 - 20 Symbol LS9203/LS9203i Product Reference Guide

UPC/EAN Supplemental Redundancy

With Autodiscriminate UPC/EAN Supplementals or one of the supplemental modes selected, this option adjusts
the number of times a symbol without supplementals is decoded before transmission. The range is from two to
thirty times. Five or above is recommended when decoding a mix of UPC/EAN symbols with and without
supplementals, and the autodiscriminate option is selected. The default is set at 20.
Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes beginning on page
D-1 in Appendix D, Numeric Bar Codes. Single digit numbers must have a leading zero. If an error is made, or to
change a selection, scan Cancel on page D-6.
UPC/EAN Supplemental Redundancy