Power Supply; Environmental Requirements; Power Supply Specifications - IBM SAN06B-R Installation, Service And User Manual

Power supply

The power supplies are universal and capable of functioning worldwide without
voltage jumpers or switches. They meet IEC 61000-4-5 surge voltage requirements
and are autoranging in terms of accommodating input voltages and line
frequencies. Each power supply has a built-in fan for cooling, pushing air towards
the port side of the switch. Table 15 lists the power supply specifications for the
switch.

Environmental requirements

Table 16 lists the acceptable environmental ranges for both operating and
non-operating (such as during transportation or storage) conditions.
38
SAN06B-R Installation, Service, and User Guide
Table 15. Power supply specifications
Specification Value
Maximum output 150 Watts
System DC power Idle: 95 W
consumption (excluding Maximum: 116 W
power supply/fan
units)
Input system power Idle: 145 W
(including power Maximum: 173 W
supply/fan units)
Input voltage 85-264 V ac, Universal
Input line frequency 47-63 Hz
BTU rating 590 BTU/hr
Inrush current Maximum of 60 amps for period between 10-150 ms
Input line protection Both AC lines are fused
Table 16. Environmental requirements
Condition Acceptable range during operation
Ambient 0° to + 40°C (32° to 104°F)
temperature
Humidity 10% to 85% RH non-condensing, at 40°C
(104°F)
Altitude 0 to 3 km (9,842 ft) above sea level
Shock 20 G, 6 ms, half-sine wave
Vibration 0.5 G sine, 5-500 Hz
Air flow Maximum: 101.94 cmh (60 cfm)
Nominal: 74.76 cmh (44 cfm)
Acceptable range during
non-operation
-25° to 70°C (-13° to 158°F)
10% to 90% RH non-condensing,
at 70°C (158°F)
0 to 12 km (39,370 ft) above sea
level
15 G, 12-18 milliseconds,
trapezoid
2.0 G sine, 5-500 Hz
NA