Placing The Heatsink Support Base Removal Tool On The Retention Pins; Using The Heatsink Support Base Removal Tool - Intel PD440FX Product Manual

2. Place the heatsink support removal tool (A)
over the two outside posts of the heatsink
support base (B) as shown in Figure 9.
Make sure the tool completely engages the
posts.
Figure 9. Placing the Heatsink Support Base
Removal Tool on the Retention Pins
A
B
OM05755
PD440FX Motherboard Product Guide
3. Carefully rock the tool back and forth until
the heatsink support base disengages from
the holes in the motherboard (Figure 10).
There is an audible click when the base
disengages from the motherboard.
Figure 10. Using the Heatsink Support Base
Removal Tool
4. Remove the tool and the heatsink support
base from the motherboard.
Now the motherboard is ready for a boxed
Pentium II processor upgrade. See the boxed
processor's documentation for installation
instructions.
3
OM05756
53