Toshiba E-Studio 2006 User Manual page 26

1 PREPARATION
2
Release the lever on the left, and then load paper face down and straight on the bypass
tray.
1
The printable side may be noted on its packaging.
3
Align the side guides with the edges of the paper, and then push back the lever.
1
 Up to 100 sheets of plain paper (80 g/m
stacked paper does not exceed the indicators of the side guides. If paper other than plain is used, set it one
sheet at a time.
 Fan the paper well before loading it on the bypass tray, otherwise multiple feeding could occur. Be careful
not to cut your fingers.
 Do not push the paper forcibly into the entrance of the bypass feeder, otherwise it could cause a paper
misfeed.
When you use paper longer than the bypass tray size, pull out the paper holder from the tray.
24 Preparation 2 - Loading Paper
2
2
2
or 20 lb. Bond) can be loaded. Be sure that the height of the