Chapter 8 Appendix; E-Studio2006/2306/2506 Specifications - Toshiba E-Studio 2006 User Manual

8 Appendix

e-STUDIO2006/2306/2506 Specifications

Model name
Type
Original glass
Printing (copying) system
Developing system
Fusing method
Photosensor type
Original scanning system
Original scanning sensor
Scanning light source
Resolution
Acceptable originals
Acceptable original size
Acceptable paper size
Acceptable paper weight
Warm-up time
First copy time (A4 or LT portrait)
Continuous copy speed
Multiple copying
Excluded image width
Reproduction ratio
Storage capacity
Paper supply
Loading capacity for the receiving tray
Toner density adjustment
Exposure control
Memory
USB interface
Environment (for normal use)
Power requirements and power consumption
(including optional equipments)
Dimensions (equipment only)
Weight (including equipment and drum)
Space occupied (equipment only)
 These specifications vary depending on the copying conditions and the environment.
 Specifications and appearance are subject to change without notice in the interest of product improvement.
130

e-STUDIO2006/2306/2506 Specifications

DP-2006/2306/2506
Desktop type
Fixed
Indirect electrophotographic method
2-component magnetic brush developing
Two halogen lamp
OPC
Flat surface scanning system
(When the RADF is installed: Fixed scanning system by feeding the original)
CMOS
LED
Writing 2400 dpi x 600 dpi (Smoothing process)
Scanning 600 dpi x 600 dpi
Sheets and books
Original glass: Max. A3 or LD
RADF: Max. A3 or LD
Drawer A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP,
13"LG, 8.5"SQ, 8K, 16K, 16K-R
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP,
13"LG, 8.5"SQ, 8K, 16K, 16K-R
Drawer
64 - 80 g/m 2 (17 - 20 lb. Bond)
Bypass 2
64 - 80 g/m (17 - 20 lb. Bond) : for continuous feed
2
52 - 63 g/m (14 lb. Bond - 17 lb. Bond), 81 - 163 g/m
Bond) : for single feed
Approx. 20 seconds
LT: Approx. 7.1 seconds
A4: Approx. 7.1 seconds
See  P.131 "Continuous copying speed"
Up to 999 copies
Copy Leading edge: 3.0±2.0 mm (0.12"±0.08")
Trailing edge: 2.0±2.0 mm (0.08"±0.08")
Both edges: 2.0±2.0 mm (0.08"±0.08")
Printer Leading edge: 5.0±3.0 mm (0.20"±0.12")
Trailing edge: 5.0±3.0 mm (0.20"±0.12")
Both edges: 5.0±3.0 mm (0.20"±0.12")
Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
Max. 100 sheets or until the memory is full (TOSHIBA's own chart)
Drawer
250 sheets (80 g/m
Bypass
100 sheets (80 g/m
Approx. 100 sheets (80 g/m
Magnetic auto-toner system
Automatic plus manual selection from 9 exposure steps
512MB
USB2.0 (Hi-Speed)
Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No condensation)
AC 220-240 V±10%, 3.7 A (50-60 Hz): 1.0 kW or less
AC 120 V±10%, 7.8 A (60 Hz): 1.0 kW or less
575 mm (22.6") (W) x 565 mm (22.2") (D) x 402 mm (15.8") (H)
Approx. 27kg (59.5 lb.)
1025 mm (40.4") (W) x 565 mm (22.2") (D)
2
, 20 lb. Bond)
2
, 20 lb. Bond)
2
, 20 lb. Bond)
2
(21 lb. Bond - 43 lb.