Toshiba E-Studio 2006 User Manual page 24

1 PREPARATION
4
Load paper face up in the drawer.
 Up to 250 sheets (80 g/m
not exceed the line indicated inside of the trailing guides.
 P.19 "Acceptable paper types"
 Fan the paper well before loading it in the drawer, otherwise multiple feeding could occur. Be careful not to
cut your fingers.
 The printable side may be noted on its packaging.
When placing LD size paper
To place LD size paper in the drawer, the end guide needs to be removed. Move it to the left end while
pushing its lower part from both sides, and then pull it upward. Keep it in the pocket on the front side of the
drawer.
5
Move the end guide to the trailing edge of the paper while pushing its lower part in the
direction of the arrows.
Do not allow any gap between the paper and the end guide in the drawer.
22 Preparation 2 - Loading Paper
2
or 20 lb. Bond) can be loaded. Be sure that the height of the stacked paper does
1
2