Avaya 1120E IP User Manual page 89

Table 10 on page 89
screen.
Table 10: Configuration options on the Headset screen (Part 1 of 2)
Option
Active Headset Device
Wired Headset Type
Enable HID Commands
Configuring the Avaya 1120E IP Deskphone
describes the configuration options on the Headset
Select the active headset device;
either USB or Wired.
Items below the Active Headset
Device field are dimmed, if either
USB headset is not selected or if
the attached headset is not one
of the Human Interface Device
(HID) supported headset types.
Select the type of wired headset
you required.
•
•
•
Enable HID Commands only if
USB headset is selected.
The checkbox is used to enable
the HID commands of supported
headsets to allow the
IP Deskphone to run in generic
mode 1 operation, supporting
both USB audio and HID
commands. The configuration is
ignored for non-supported USB
headsets.
Function
Note: The headset can be
selected before it is attached
(wired or USB).
Headset Type 1 (Generic
narrow band)
Headset Type 2 (Wideband)
Headset Type 3 (Wideband)
89