Dropouts, Horizontal Streaks, Stray Dots; Black Or White Vertical Streaks - Kyocera FS 3750 User Manual
Kyocera laser printer user's manual fs-1750, fs-3750
Hide thumbs
Also See for FS 3750:
- Specifications (2 pages) ,
- Command reference manual (410 pages) ,
- Technical reference manual (260 pages)
Table of Contents
Advertisement
5.4. Print Quality Problems
Dropouts, horizontal streaks, stray dots
Clean the charger wire.
Open the printer side cover. Pull the green main charger wire cleaning knob slowly in and out a few times.
See Section 4.2.
Note the spacing of the defects.
If the defects occur at regular intervals of 60.6 mm (2.4 inches), the problem may be a dirty transfer roller.
Call for the assistance of a service person.
If the defects occur at regular intervals of 94 mm (3.7 inches), the problem may be a damaged drum unit or
fuser roller. Call for the assistance of a service person.
Black or white vertical streaks
Check the control panel.
If theý7RQHU ORZ 7.ðëí &OHDQ SULQWHU message is displayed and the
indicator is flashing,
install a new toner kit. See Section 4.1.
Clean the charger wire.
Open the printer side cover. Pull the green main charger wire cleaning knob slowly in and out a few times.
See Section 4.2.
Call for the assistance of a service person.
If the above checks do not solve the problem, call for the assistance of a service person.
5-4
Advertisement
Table of Contents
