Kyocera FS 3750 User Manual page 39

1.5. MP (Multi-Purpose) Tray Feeding
3.
Raise the paper protector bar until it locks in the up
position. Then adjust the paper guides to the size of
the paper being fed.
4. Check that the message 5HDG\ is displayed in the printer's message display, and that the ON LINE
indicator is lit.
5.
Set the paper source to the multi-purpose tray by pressing the FEED key until the message display indi-
cates 03ýWUD\. The multi-purpose tray indicator on the control panel will flash, and $GGýSDSHU
will be displayed.
Press the MODE key. Then use + or – keys to display 3DSHUýKDQGOLQJýýý!.
6.
(Form Feed) key to display !03ýWUD\ýVL]H or !ý03ýWUD\ýW\SH, then press the ENTER
7.
Press the
key so you can set the paper size or type to be fed from the MP tray. See Mode Select Menu at the end of
this manual.
The following pages explain the use of the MP tray in the Cassette Mode and First Mode.
First Mode (Automatic Manual Feeding)
The printer automatically feeds the paper placed on the MP tray regardless of the current paper source selec-
tion. To use the first mode (automatic manual feeding mode), simply place a sheet of paper on the MP tray
in the same manner as above, even while the printer is presently feeding the paper in the printer's cassette.
Press the MODE key. Then use + or – keys to display 3DSHUýKDQGOLQJýýý!.
1.
(Form Feed) key to display !03ýWUD\ýPRGH.
2.
Press the
After pressing the ENTER key, the mode display is changed by pressing the + and – keys. Display )LUVW
3.
and then press the ENTER key.
!03 WUD\ PRGH
)LUVW
4.
Press the EXIT key.
The printer will not switch to light the MP tray indicator while the paper is fed manually using the
automatic manual feeding mode.
1-20
Protector Bar
Paper Guides