Kyocera FS 3750 User Manual page 81

Kyocera laser printer user's manual fs-1750, fs-3750
Hide thumbs Also See for FS 3750:
Table of Contents

Advertisement

6.
Install the toner container on the developer as shown
in the diagram.
Be sure to peel off the seal on the toner container
before mounting the toner container on the devel-
oper unit.
7.
When the toner container is installed correctly on
the developer.
8.
Push the top of the toner container unit ("PUSH HERE")
until it locks in.
Make sure that the toner container is properly
locked in the printer.
9.
Close the top cover by pressing the arrowed part in
this diagram.
It is necessary to clean the inside of the printer
after replacing the toner container.
If the toner container is replaced when the messageý 5HSODFH 7RQHUý &OHDQ SULQWHU is dis-
played, the messageý &OHDQý SULQWHUý 3UHVVý &217,18( will be displayed after replacement.
After cleaning the inside of the printer (See Section 4.2. Cleaning), the message will disappear when
the CONTINUE key is pressed, and the printer will be ready for printing.
4.1. Toner Kit Replacement
4-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-1750

Table of Contents