POWR
2. Disconnect the throttle cable 1 and shift
cable/shift rod 2.
3. Disconnect the fuel hose 3 and throttle
link rod 4.
4. Disconnect the battery leads 5, 10-pin
coupler 6, PTT relay leads 7 (EHT,
ET), PTT motor leads 8 (EHT, ET),
ground lead 9 (EHT, ET), warning indi-
cator coupler 0 (EHD, EHT), trailer
switch coupler A (EHT, ET), pilot water
hose B, and flushing hose (models with
flushing device).
5-27
Power unit
5. Remove the power trim and tilt relay C,
shift rod D and shift rod bolts E.
6. Remove the apron F.
62Y3A11