Top Tension - Janome 8050 Service Manual

toP tension

the top tenSion ShoUld be between 65 and 80g when pUlling the thread Up in the
direction of arrow.
* USe polyeSter Sewing thread #50 (white).
* if it iS not within the above limit, adjUSt aS followS.
1. Set the tenSion dial "4".
2. remove the cover.
3. lower the preSSer foot.
• If the top tensIon Is too loose, turn the lead screw In the dIrectIon (a).
• If the top tensIon Is too tIght, turn the lead screw In the dIrectIon (B).
4. check the top tenSion and attach the cover.
meCHaniCal adjustment
cover
pUll the thread at the Speed of 110 mm/Sec
in the direction of arrow
white polyeSter thread Size 50
16