What To Do When - Janome 8050 Service Manual

Condition
1. Skipping 1. needle iS not inSerted
StitcheS properly.
2. needle iS bent or worn.
3. incorrectly threaded.
4. needle or thread are
inappropriate for the
fabric being Sewn.
5. Sewing on
Stretch fabric.
6. inappropriate needle
bar height.
7. inappropriate needle to
hook timing.
8. inappropriate needle to
hook clearance.
9. hook iS broken or too
worn.
2. fabric not 1. incorrect feed dog
moving height.
2. feed dog iS in down
poSition.
3. thread on bottom Side of
fabric iS jammed Up.
4. feed dog teeth are worn.

wHat to do wHen

Cause
inSert the needle properly.
change the needle.
rethread.
USe the recommended Sewing
needle and thread.
USe a ha x #11 blUe tip needle.
See mechanical adjUStment
"needle bar height".
See mechanical adjUStment "ad-
jUStment of hook timing".
See mechanical adjUStment
"clearance between needle
and tip of the rotary hook".
See "replacing hook"
adjUSt the preSSer bar level
to make the preSSUre Stron-
ger. See mechanical adjUSt-
ment "feed dog height".
raiSe the feed dog.
make SUre to bring both needle
and bobbin threadS Under the
foot when Start Sewing.
change the feed dog.
1
How to fix RefeRenCe
p. 13
p. 11
p. 14
p. 12
p. 15