Top Tension - Janome XL601 Service Manual

Mechanical Adjustment

Top tension

The top tension should be between 65 and 80g when pulling the thread
* Use polyester sewing thread #50 (White).
* If it is not within the above limit, adjust as follows.
1. Set the tension dial "Auto".
2. Remove the cover.
3. Lower the presser foot.
• If the top tension is too loose, turn the lead screw in the direction (A).
• If the top tension is too tight, turn the lead screw in the direction (B).
4. Check the top tension and attach the cover.
Cover
Pull the thread at the speed of 110
mm/sec in the direction of arrow
16
q
up in the direction of C.
White polyester thread size 50