Interior Lights - Vulcan-Hart SG4D ML-114875 Service Manual

3. Disconnect the lead wires from the high limit
thermostat. Remove the high limit thermostat
from the cover mounting plate.
4. Remove the old RTV silicone from the cover
and mating surfaces inside the oven cavity,
and apply new RTV silicone before installing.
5. Reverse procedure to install.

INTERIOR LIGHTS

WARNING: DISCONNECT (UNPLUG) ELECTRICAL
POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH INDICATING YOU ARE
WORKING ON THE CIRCUIT.
1. Remove the racks from the oven.
2. Unscrew the glass lens for the light being
replaced, then unscrew the bulb.
3. Replace bulb, then reverse the procedure to
install.
– 18 –
LENS
LENS
OVEN CAVITY
PL-56054