Fujitsu AU*G36LRLA Design & Technical Manual page 283

FUNCTION SETTING
„ „
(5) Press the "MODE" button to access the
function setting mode.
(7) Press the FAN button to proceed to setting
the number. (Press the FAN button again
to return to the function number selection.)
(9) Press the "TIME MODE" button once to
send the function mode information.
FUNCTION DETAILS
„ „
Refer to 6-6. FUNCTION DETAILS
Pi Pi
- (05-54) -
(6) Press the " " or the "
p
the function number.
Each time the "MODE" button is pressed, it
switches between the one's place and the ten's
place positions.
(8) Press the " " or the "
p
the setting number.
Each time the "MODE" button is pressed, it
switches between the one's place and the ten's
place positions.
(10) Press the "START/STOP" button once to
send the function setting information.
A beeping noise will be heard if the
command is accepted.
*Wrong code: No response
Note: Please push "START/STOP" button within 30
seconds after pushing "TIME MODE" button.
" buttons to select
q
Change digit
" buttons to select
q
Change digit
Pi Pi