Fujitsu AU*G36LRLA Design & Technical Manual page 11

2-REMOTE CONTROLLERS CONTROL
„ „
Control locally and from a remote point is possible using 2-remote controllers.
Single system
z „
Refrigerant pipe
Indoor unit
(Primary)
Wired R.C.
* For 2 wired-type remote controllers, specify a primary and a secondary remote controller.
* The timer and 10°C HEAT (Wireless R.C. only) functions of the remote controller specified as the secondary cannot be used.
* When using a wireless type remote controller, install IR Receiver unit to the indoor units.
(Cassette type, Duct type)
Simultaneous multi system
z „
Refrigerant pipe
Indoor unit 0 Indoor unit 1
(Primary) (Secondary)
(Primary)
Wired R.C.
* For 2 wired-type remote controllers, specify a primary and a secondary remote controller.
* The timer and 10°C HEAT (Wireless R.C. only) functions of the remote controller specified as the secondary cannot be used.
* In simultaneous multi connection, the timer and 10°C HEAT functions by using the wireless remote controller cannot
be used.
* When using a wireless type remote controller, install IR Receiver unit to the indoor units.
(Slim duct type, Duct type)
(Secondary)
Wired R.C. Wired R.C.
Indoor unit 2 Indoor unit 0
(Secondary) (Primary)
(Secondary)
Wired R.C. Wired R.C.
- (01-07) -
Refrigerant pipe
Indoor unit
(Primary)
Wireless R.C.
Refrigerant pipe
Indoor unit 1 Indoor unit 2
(Secondary) (Secondary)
(Primary)
Wireless R.C.
Transmission/
Power supply cable
Remote controller cable
Transmission/
Power supply cable
Power supply cable
Bus wire
Remote controller cable