Connecting To A Switchboard; Access Code And Pause; Access Code On/Off - BT PARAGON 500 User Manual

5840 Paragon 500 SMS UG [3]

Connecting to a switchboard

This product is intended for use within the UK for connection to public telephone network
and compatible switchboards, which support tone dialling and timed break recall. If in
doubt please consult your service provider.
Switchboard external line access code
You may need to enter an access code (e.g. 9) in order to get an outside line. So that the
switchboard has time to pick up an outside line, you may also need to add a Pause after
the access code. You can do this as part of setting the access code.
Set access code and Pause
1. Press scroll
Menu
2. Press or
3. Enter the access number – up to 3 digits.
4. If required, press
When the access code is switched On, it will be dialled automatically when dialling from
the phonebook.

Access code On/Off

1. Press scroll
Menu
2. Press or
10/5/04
BT Paragon 500 – Edition 4 – 10.05.04 – 5840
ACCESS CODE
to and press
to set ACCESS CODE ON then press
and press . Display shows
Pause
to ACCESS CODE and press
to switch between ACCESS CODE ON
5:14 pm Page 59
.
.
ACCESS CODE COMPLETED
.
/ OFF then press
General information
.
to confirm.
59