Handset Priority; Dial Mode - BT EQUINOX 1200 User Manual

6215 Equinox 1200 UG

Handset priority

Normally, if you have more than one handset registered
to your base, they all ring at the same time. However, you
can set one of them to ring before the others, so that calls
can always be answered at one handset first.
1. Press MENU then scroll
press OK. Press
then press OK.
Display highlights
Handsets to make all handsets ring together.
Or
2. Scroll to Select Handset
to the handset you want to ring first. Press OK.
3. Scroll or
handset before the other handsets start ringing. Press
to confirm.

Dial mode

Your BT Equinox 1200 is set to Tone dialling. You can
switch to Pulse dialling.
1. Press MENU then scroll to
Scroll to Dial Mode
2. Press or
to confirm.
9/6/04 11:27 am
BT Equinox 1200 – Edition 6 – 28.05.04 – 5757
to Base Settings
to highlight Handset Priority
All Handsets
. Press OK
and press OK. Scroll
to select the number of rings at the
Base Settings
and press OK.
Pulse Tone
to highlight or
Page 59
Connecting to a
switchboard/PBX?
For Access code, Recall and Dial
mode settings see, Connecting to
a switchboard, page 78.
and
to select All
or
OK
and press OK.
and press OK
Base settings 59