Specifications - Alpine CDA-105 Quick Reference Manual

Specifications
• Due to continuous product improvement, specifications and design
are subject to change without notice.
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Hannonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
USB SECTION
87.7-107.9 MHz
9.3 dBf (0.8 J.IV175 ohms)
13.5 dBf(1.3 J.IV175 ohms)
80dB
65 dB
35 dB
2.0dB
530-1,710 kHz
22.5 J.lV127 dB
5-20,000 Hz (±I dB)
Below measurable limits
0.008% (at I kHz)
95 dB (at I kHz)
105 dB
85 dB (at I kHz)
CHASSIS SIZE
Width
Height
Depth
NOSEPIECE SIZE
Width
Height
Depth
178 mm (7")
50 mm (2")
160 mm (6-1/4")
170 mm (6-3/4")
46 mm (1-13/16")
24 mm (15/16")
USB requirements USB 1.112.0
Max. Power Consumption 500 rnA
USB Class Mass Storage
File System FAT 12/16/32
MP3 Decoding MPEG-1/2 AUDIO Layer-3
WMA Decoding Windows Media™ Audio
AAC Decoding AAC-LC format ".m4a" file
Number of Channels 2-Channel (Stereo)
Frequency Response* 5-20,000 Hz (±I dB)
Total Hannonic Distortion 0.008% (at I kHz)
Dynamic Range 95 dB (at I kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at I kHz)
* Frequency response may differ depending on the encoder
softwarelbit rate.
PICKUP
Wave length
Laser power
GENERAL
795 nm
CLASS I
Power Requirement 14.4 V DC
(11-16 V allowable)
Power Output 18 W RMS x 4*
*Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and S 1% THD+N
• SIN: 80 dBA (reference: I W into 4 Ohms)
Maximum Pre-Output Voltage 2 V110 k ohms
Bass ±14 dB at 100 Hz
Treble ±14 dB at 10 kHz
Weight 1.6 kg (3 Ibs. 8 oz)
39-EN