Playback; Searching For A Desired Song - Alpine CDA-105 Quick Reference Manual

Playback
1
Press SOURCE/<!) to switch to the USB iPod mode.
TUNER
4
XM RADIO/SIRIUS·
I
4
DISC
~
USB AUDIO·
2
/
USB iPod']
4
BT AUDIO·
4
/AUX+·
5
~
CHANGER·
6 ~
TUNER
.1
Only when XM Radio or SIRIUS Radio is connected.
• 2 Disp/ayed only when no iPhoneliPod is connecled.
.3
Displayed only when Ihe iPhoneliPod is connected.
04 Displayed only when BLUETOOTH IN is set to ADA PTE. refer
10
"Setlinl: Ihe B/uetooth Connection" (pal:e 17).
.5
Displayed only when the AUX
+ SETUP is set to ON. refer to "Set/inl:
the AUX+ SETUP Mode" (pal:e 18).
• 6
Only when the CD chanl:er is connected.
2
Press
~
or
~
to select the desired song.
Return to the beginning of the current song:
Press
~.
Fast backward through current song:
Press and hold ,.......
Advance to the beginning of the next song:
Press
~~.
Fast forward through current song:
Press and hold
~.
3
To pause playback, press
~/II.
Pressing ~/II again will resume playback.
• A
SO/lEI
playinEi on the iPhoneliPod while it is connected
to
this unit
will continue to play fmm where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook. the
episode con be changed by pressing'" or
~
.
• An episode may have several chapters. The chapter can be changed
by pressinEi
~
or
~.
Searching for a desired Song
An iPhone/iPod can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit's
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the
PLA YLiSTI ARTISTIALBUM/SONGIPODCAST/GENREI
COMPOSERIAUDIOBOOK search mode to narrow searches based on
the table below.
Hierarchy 1
Hierarchy 2 Hierarchy 3 Hierarchy 4
PLAYLIST SONG
-
-
ARTlST* ALBUM- SONG
-
ALBUM-
SONG -
-
SONG - - -
PODCAST EPISODE
-
-
GENRE- ARTIST- ALBUM- SONG
COMPOSER-
ALBUM-
SONG
-
AUDIOBOOK -
- -
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
24-EN
1
Press
0..
lENT
to activate the search selection
mode.
2
Turn the
Rotary encoder
to select the Artist search
mode, and then press
0..
lENT.
PLAYLIST
H
ARTIST
H
ALBUM
H
SONG
H
PODCAST
H
GENRE
H
COMPOSER
H
AUDIOBOOK
H
PLAYLIST
3
Turn the
Rotary encoder
to select the desired
Artist, and then press
0..
lENT.
4
Turn the
Rotary encoder
to select an album, and
then press
0..
lENT.
5
Turn the
Rotary encoder
to select a song and
press
0..
lENT.
The selected song is played back.
• After pressing and holding
0..
lENT for at least 2 seconds while in
each hierarchy (except SONG and AUDIOBOOK hierarchy). all
songs of the selected hierarchy are played back.
• After selecting [ALL] in the search mode with ...... press and hold
0..
lENT for at least 2 seconds to play back all sonEis in the iPhonel
iPod or selected search mode.
• While in the search mode.
if
you press and hold
~
IESC for at least
2
seconds. or no operation is perfonnedfor 30 seconds, the search
mode is canceled.
• In the search mode. pressing
~/ESC
will return to the previous
mode.
• When search is made during M.I.X. play. the M.I.X. play mode will be
canceled.
• "NO SONG" will be displayed
if
there is no song in the selected
playlist in the PLAYLIST search mode.
• "NO PODCAST" will be displayed
if
there is no podcast data in the
iPhoneliPod in the PODCAST search mode.
• "NO AUDIOBOOK" will be displayed
if
there is no audiobook data
in the iPhoneliPod in the AUDIOBOOK search mode.
• If "iPod name" stored in the iPhoneliPod is selected in the desired
playlist search mode and
0..
lENT is pressed. you can search for all
sonEis in the iPhoneliPod. Also,
if
you press and hold
0..
lENT for at
least 2 seconds, all sonEis in the iPhoneliPod are played back.
• Depending on the iPhoneliPod. podcast search is not supported.
• If Alphabet Skip Function is activated in the search mode. a search
can be made quickly by Alphabet skip function to find the desired
artist or song. etc. For details. refer to "Alphabet Skip Function" on
page 25.
• If anyone ofthe preset buttons
(l
through
6)
is pressed in the search
mode. a search can be made quickly by skipping to the specified
location. For details. refer to "Direct Search Function" on page 25.
• !fno operation is performedfor 30 seconds during search mode. the
unit will return to normal mode.