Affixing The Fastening Tape (Option) - Epson TM-U200D series Operator's Manual

WARNING:
If an accident occurs when the power switch cover is
attached, unplug the power supply cord from the outlet
immediately.

Affixing the Fastening Tape (Option)

Two sets of tape are included as an option to fasten your printer to
a countertop or other surface. Follow the steps below:
1. Clean the countertop or other surface where the printer will be
installed.
2. Peel the green backing paper off of one side of each of the two
sets of tapes and affix them to the bottom of the printer, as
shown below.
3. Peel the green backing paper off of the other side of the tapes.
4. Press the printer onto the countertop; it will be held firmly in
place by the fastening tape.
1–22 Setting Up the Printer