Installing The Ribbon Cassette - Epson TM-U200D series Operator's Manual

Installing the Ribbon Cassette

CAUTIONS:
Never turn the ribbon cassette's feed knob in the opposite
direction of the arrow marked on the cassette; otherwise the
ribbon cassette may be damaged.
Be sure the printer is not receiving data when you replace a
ribbon cassette; otherwise data may be lost.
Note:
Use the EPSON ERC-38 (B),ERC-38(P), or ERC-38(B/P) ribbon
cassette for your printer.
The illustrations used in this section are for the single-color type
printer. However, the procedure is the same for the two-color type
printer.
1. Open the printer cover.
2. Turn the ribbon cassette's knob in the direction of the arrow, to
take up any slack in the ribbon. Then lift up the left side with
your fingers and remove it.
3. Insert the ribbon in the position shown in the illustration on the
next page and push the ribbon cassette until it clicks.
Setting Up the Printer 1–11