Passing Tape Of Bulk Label Quick Kit (Option) Through The Cartridge - Epson LabelWorks LW-Z5000 Series User Manual

Passing Tape of Bulk Label Quick Kit (Option) Through
the Cartridge
If the tape of Bulk label quick kit comes off the cartridge, set the tape following the procedure below.
CAUTION
Press the [Push] button on the cartridge.
1
You will see a gap as shown below.
Pass the tape through the cartridge.
2
Let the leading edge of tape protrude by about 3 cm from the cartridge.
Face the backing paper side upward
Press the cartridge as shown below to close the gap.
3
• Do not touch the print side of the tape with your bare hands. If the print side is
smeared, it will result in a drop in print quality.
• Be careful not to let the tape skew in the cartridge.
Maintenance
45