Installing The Ribbon Cassette; Installing The Paper Roll - Epson TM-U200 Series User Manual

Installing the Ribbon Cassette

CAUTION:
Never turn the ribbon cassette's feed knob in the opposite direction of
the arrow marked on the cassette; otherwise the ribbon cassette may
be damaged.
Note:
Use the EPSON ERC-38 ribbon cassette for your printer.
1. Open the printer cover and turn the knob two or three times in
the direction of the arrow as shown in illustration
2. Open the autocutter by pulling the tab up and toward you.
3. Insert the ribbon in the position shown in illustration
and push the ribbon cassette down until it clicks.
Note:
Make sure the ribbon is installed between the print head and the
platen without wrinkles or creases.
4. Again turn the ribbon cassette's knob 2 or 3 times in the
direction of the arrow, close the autocutter by using the tab,
and close the printer cover.

Installing the Paper Roll

1. Using scissors, cut the leading edge of the paper roll as shown
in illustration
2
on the next page.
4
3
TM-U200 User's Manual 5
English
below.
2
below
3